GSP NZD ISO FLUSH (5 Gal)

Product Description

NZD ISO FLUSH ™
Isocyanate Resin Cleaner & Neutralizer is highly effective in Flushing excess Liquid Isocyanate from processing equipment (feed lines, feed tanks, mixing and metering equipment), as well as loosening and removing partially crystalized isocyanate residue and build-up from equipment and parts. No need to pre-flush Part (A) with Mineral Oil before using

NZD ISO FLUSH ™ effectively removes
 Liquid & semi-hardened Isocyanate Part (A), Polyol
Part (B), Cured Polyurethane Reactive Hot Melt
Adhesives from Roll Coating Equipment and
Dispensing Equipment, as well as many other industrial adhesives
 Industrial Resins such as Polyester, Vinylester, Epoxy, and Pigmented Gel Coats, as
well as, Fiberglass and Resin Mixture
 Coatings such as High & Low Solid Aliphatic, Water Borne Epoxy Primers,
Polyurethane, Acrylic, Varnishes, and Alkyl Enamel

Features & Benefits
ÔÉÉ Low VOC
ÔÉÉ High Resin/Polymer loading
ÔÉÉ Recyclable via vacuum distillation - resulting in reduced disposal costs
ÔÉÉ Replaces solvents such as NMP, Acetone, MEK, Methylene Chloride,
ÔÉÉ Low rate of evaporation

Application
Use Full Strength at room temperature. DO NOT heat this product.
 Flush out the entire ISO (A) Line throughout the system by placing the Transfer Pump
inside a pail containing 2-3 gallons of NZD ISO FLUSH™ Isocyanates Cleaner &
Neutralizer
 Allow the transfer pump to pass the solvent throughout the system by
recirculating for 4 hours or until it runs clear and then finally push the spent
cleaning solvent and ISO mixture into a waste bucket
 Once the system is free of Isocyanates, you are now ready to flush the mixture
of ISO and NZD ISO FLUSH™ inside the system with
SurfaLube™ Equipment Storage Fluid and store the equipment OR you
decide to go back to spraying foam; you can purge the lines with a few Quarts
of Isocyanates, and now you are ready to spray away
√î√á‚àÇ For QUICK hand wipe applications, use NZD ISO FLUSH ™ GO GREEN™
Wipes

IMPORTANT: DO NOT leave NZD ISO FLUSH™ inside the system