Product Description
SurfaLube ™ Equipment Storage Fluid
is used as a storage fluid in Urethane Dispensing
Equipment as well as Polyurea Spray Equipment. Its
coalescing properties allow storage of equipment for
up to 36 months.
Improved Performance with a Superior Environmental
Profile, SurfaLube™ is stable under normal storage
conditions. Compatible with machines and
transfer pumps made of Carbon Steel or
Stainless Steel and Aluminum Alloys. Gentle on
most O-rings, gaskets, seals and lining. Does not
freeze under severe cold environment (<-90 °F).
Once the hoses and polyurethane spray equipment is
thoroughly flushed, SurfaLube™ is introduced to the equipment through spray lines, this
helps eliminate the formation of Polyurea and Crystallized Isocyanates that may form when any
remaining residue reacts with moisture in the air.
Eliminate disposal costs by recycling the spent SurfaLube™ via Vacuum Distillation.
PREPARING SYSTEM FOR STORAGE
Once the hoses and polyurethane spray equipment are thoroughly flushed with
NZD ISO FLUSH™ Isocyanate Cleaner, SurfaLube™ is introduced to the equipment
through hoses and spray lines. This will help eliminate formation of Hardened Isocyanates
and coatings that may form when any remaining residue reacts with moisture in the air.
Hoses & Lines
√î√â√â Flush thoroughly with NZD ISO FLUSH™ Isocyanate Cleaner and Neutralizer to
remove all liquid and semi-liquid Isocyanate (Part A)
ÔÉÉ During Flushing, make sure the heaters on the machine are turned off
Guns
√î√â√â Flush Spray Guns thoroughly with SURF X FLUSH 2000 ™ to remove most
uncured and cured Polyurethane
Pump
√î√â√â Pump SurfaLube ™ into the system so that it remains in hoses and lines
ÔÉÉ Store unit in a cool and dry (moisture free) area for up to 36 months
√î√â√â When starting up the unit, flush out SurfaLube ™ completely!
ÔÉÉ Introduce Polyurethane into the unit (The first few pounds of Part A & B sprayed through the system should be scrapped to avoid any adhesive failure. Then you are
Ready to Go!
