Product Description
Product Overview
NZD ISO FLUSH™ is a high-performance isocyanate cleaner and neutralizer formulated to remove
liquid and semi-hardened isocyanate (Part A), polyol (Part B), cured polyurethane reactive hot-melt
adhesives, and industrial resin buildup from processing equipment.
It effectively loosens partially crystallized isocyanate residue from feed lines, feed tanks, mixing and
metering equipment, roll-coating systems, and dispensing systems. No pre-flushing with mineral oil is
required.
Applications
• Liquid & semi-hardened Isocyanate Part (A)
• Polyol Part (B)
• Cured polyurethane reactive hot melt adhesives
• Polyester, Vinyl ester, Epoxy, and Pigmented Gel Coats
• Fiberglass and resin mixtures
• High and Low Solid Aliphatic Coatings
• Waterborne Epoxy Primers, Polyurethane, Acrylics, Varnishes, and Alkyd Enamels
Features & Benefits
• High Resin / Polymer Loading
• Replaces NMP, Acetone, MEK, and Methylene Chloride
• Low Rate of Evaporation
Flushing Procedure
Use Full Strength at room temperature. Do Not Heat this product.
• Place transfer pump in 2–3 gallons of NZD ISO FLUSH™.
• Recirculate through ISO (A) line up to 4 hours maximum or until clear.
• Push spent solvent and residue into the waste container. Do Not Reuse.
• Purge the system with fresh isocyanate before returning to service.
• Maximum Flushing Time: 4 Hours - Do Not Leave the System Overnight
Environmental Profile
• Low VOC • Nonflammable • Low Toxicity • Noncorrosive
• Nonhazardous • Contains No Ozone Depleting Substances (ODS)
• Contains No Hazardous Air Pollutants (HAPs)
U.S. Regulatory and International Compliance
• No CA Proposition 65 Listed Ingredients
• No SARA 311/312/313 Reportable Components
• REACH Compliant
