Shop by Category
Airless Paint Guns
Airless paint guns from Graco, stocked for the contractors who run them hard all day. Christian Fabrication carries the Contractor PC, Contractor PC Compact, Contractor FTX and Flex Plus airless spray guns, along with gun and hose kits and the repair parts that keep them spraying. Every gun on this page is a genuine Graco gun, so you can be sure you’re browsing industrial grade tools certified for your job site.
Built for Contractors, Backed by Graco Reliability
The Contractor PC is one of the lightest, most comfortable spray guns ever built, and the spec sheet backs that up. Up to 50% lighter trigger pull force. An E-Z Fit trigger with 2, 3 or 4 finger positions. A ProConnect cartridge that puts the needle and all wear parts in one piece, so you rebuild the gun on the job in seconds. The RAC X 517 SwitchTip lays down a 10 inch pattern for walls and ceilings.
Shop by Type
Compact and Lightweight Guns
- Graco Contractor PC Airless Spray Gun, RAC X, LTX: the full-size Contractor PC with EasyGlide swivel and ambidextrous trigger lock.
- Graco Contractor PC Compact Airless Spray Gun: 25% lighter and 25% smaller than the standard Contractor gun with a 50% lighter trigger pull.
Heavy Coating and Joint Compound Guns
The Graco Flex Plus Airless Spray Gun is the gun for heavy coatings and joint compound. Large fluid path that reduces clogging, no adjustment needle, 2 finger trigger, and it ships with a RAC X 517 SwitchTip and guard.
Need a package? The Graco Contractor Gun Hose Kit with RAC X 517 SwitchTip adds the hose.
Repair kits and filters are ready to browse in our collection of Airless Paint Gun Parts, and the rest of the line, including Airless Paint Sprayer Hoses, can be found here: Paint Equipment.
Frequently Asked Questions
What is the difference between an airless paint gun and a spray foam gun?
An airless paint gun like the Graco Contractor PC sprays a single material, paint or coating, pushed through a SwitchTip by an airless sprayer. A spray foam gun such as the Graco Fusion AP or Fusion FX is a plural-component gun that mixes A and B chemicals at the gun and runs off a Reactor proportioner and heated hose. If you spray foam or polyurea, you’ll want to check out our Guns category.
What tip size should I use for my Graco airless paint gun?
The guns on this page ship with a RAC X 517 or RAC 5 515 SwitchTip, and the 517 gives a 10 inch pattern that suits large surfaces like walls, ceilings and house exteriors. The right tip depends on the coating and the pattern width you want, so check the coating manufacturer's recommended tip range first.
Do you offer replacement parts for Graco Contractor PC and Flex Plus guns?
Yes. Airless Paint Gun Parts stocks the Contractor and FTX gun repair kit and replacement gun filters. Feel free to contact us at (315) 822-0095 if you are not sure which kit fits your gun.