Shop by Category
Graco T2 Pump Parts
Genuine Graco T2 pump parts for the 2:1 ratio air driven transfer pump that moves A and B chemicals from the drum to your proportioner. If you are a contractor who maintains your own rig, you’ve come to the right place. Here we carry complete seal kits, upper and lower seal repair kits, shaft repair kits, flange kits, tube suction kits, air motor kits and the individual wear parts that wear out first.
Keep Your T2 Transfer Pump Running
A transfer pump that loses prime or weeps chemical at the packing nut will stall a job faster than almost anything else on the rig. The Graco T2 uses stainless steel wetted parts and PTFE seals, so most repairs come down to seals, packings and the shaft, not a new pump.
Got a pump that’s past saving? The complete Graco T2 Transfer Pump is available too.
Shop T2 Parts by Category
Seal and Repair Kits
- Graco T2 Complete Seal Kit, Upper and Lower (24X056): every part in upper kit 262034 and lower kit 247883, with the spring pins from series A and B pumps upgraded to a solid clevis pin.
- Graco Upper Seal Repair Kit, T2 (262034): air section only, with square packings, PTFE V-packings, packing glands and rod wiper.
- Graco Lower Seal Repair Kit, T2 and T3 SST (247883): fluid section, with piston cup packing, U-cup packing, wear ring and balls.
- Graco T2 Shaft Repair Kit (256560): upgrades series A pumps to the multi-piece shaft.
Frequently Asked Questions
How do I know which Graco T2 pump parts I need?
Start with the reference numbers in your Graco T2 parts manual, then match them to the part numbers listed on each product page here. Pump series matters too. Series A pumps shipped with a one-piece shaft that kit 256560 upgrades to a multi-piece assembly, and both series A and B pumps shipped with spring pins that the current seal kits replace with a solid clevis pin. If you’re not sure, send us a photo of the pump and the ID tag and our technicians will match the kit before you order.
What is included in a Graco T2 complete seal kit?
Kit 24X056 combines the upper air section kit 262034 and the lower fluid section kit 247883 in one complete kit. That means square packings, an air valve O-ring, the green O-ring, male and female packing glands, PTFE V-packings, a rod wiper, an encapsulated PTFE O-ring and PTFE gasket for the air side, plus piston cup packing, U-cup packing, a wear ring, intake and outlet balls, clevis pins and O-rings for the fluid side.