Product Description
The WINCO EC22000VE-03/A is a 22kW gas vehicle mount generator with 19,000 running watts. It is one of the largest air-cooled generators we’ve found for vehicles and trailers, and it costs less and weighs less than a liquid-cooled unit.
It runs on a Briggs & Stratton Vanguard engine and delivers 120/240V single-phase power. Every unit is load tested at the factory before it ships. WINCO vehicle mount generators are used in spray foam insulation, construction, mining, oil field, service and emergency vehicles.
Key features
- Power: 22,000 starting watts and 19,000 running watts, with 79 amps on 120/240V single-phase
- Engine: Briggs & Stratton Vanguard, premium-grade and built to power equipment that works for a living
- Air-cooled: lower cost and weight than liquid-cooled models
- Low oil protection: the engine shuts down at a low oil level to prevent damage
- Vacuum fuel pump: 30" fuel lift capability
- MAUX auxiliary system: the generator end handles 300% motor starting inrush for 20 seconds
- 100% load tested: every generator is tested before it leaves the factory
Build your power setup
Pair this generator with an air compressor on your rig, and keep your compressor running with air compressor parts. See all generators and compressors from Christian Fabrication, or follow our equipment maintenance tips to protect your investment.
Specifications
This page is for the 120/240V single-phase unit. The three-phase options are listed for reference.
|
Spec |
120/240V Single Phase |
120/208V Three Phase |
120/240V Three Phase |
277/480V Three Phase |
|---|---|---|---|---|
|
Starting watts |
22,000 |
22,000 |
22,000 |
22,000 |
|
Running watts |
19,000 |
19,000 |
19,000 |
19,000 |
|
Power factor (PF) |
1.0 |
0.8 |
0.8 |
0.8 |
|
Amps |
79 |
65 |
57 |
28 |
|
Circuit breaker size |
80 Amp |
60 Amp |
60 Amp |
30 Amp |
Guide: how to size a vehicle mount generator
- List your loads. Write down the running watts of every tool and machine you will run at once.
- Add them up. Your total running watts should stay under 19,000 for this generator.
- Check starting loads. Motors such as compressors pull more power at startup. This unit's MAUX system handles 300% motor starting inrush for 20 seconds.
- Match the voltage. This model is 120/240V single-phase. At 240V, 19,000 watts is about 79 amps, which matches the 80 Amp breaker.
- Plan the mount. Because it is air-cooled, it adds less weight to your truck or trailer than a liquid-cooled unit.
FAQs
How many watts does the WINCO EC22000VE-03/A produce? It produces 19,000 running watts and 22,000 starting watts.
What is a vehicle mount generator used for? It supplies power from a truck or trailer. WINCO vehicle mount generators are used in spray foam insulation, construction, mining, oil field, service and emergency vehicles.
Is this generator air-cooled or liquid-cooled? It is air-cooled. That keeps cost and weight lower than a liquid-cooled generator of similar output.
Can it start motors and compressors? Its MAUX auxiliary system lets the generator end withstand 300% motor starting inrush for 20 seconds, which helps with motor starting loads.
What protects the engine? Low oil protection shuts the engine down at a low oil level. Every unit is also 100% load tested before it leaves the factory.
What is the difference between the single-phase and three-phase models? This page covers the 120/240V single-phase model with an 80 Amp breaker. WINCO also makes 120/208V, 120/240V and 277/480V three-phase versions, listed in the specifications table.
